Pipe pulling heads
Pulling heads for pipe from 25 to 355 mm outside diameter — clamp-in heads with or without cap, and welding heads.
Grip the pipe from the inside
The head goes into the pipe end and clamps against the inside wall, with an eye bolt on top for the swivel. The heads are easy to handle and can be fitted without any additional tools. All standard sizes and spare parts are available from stock.
- High-grade steel, electro-galvanised
- Extra heavy-duty design
- For pipe outside diameters from 25 to 355 mm
- Load capacity from 0.8 to 32 tonnes in straight pull
- Fitted without any additional tools
With cap, without cap or welding head
Clamps inside the pipe, with a cap that seals the pipe end during the pull. Seventeen sizes from 32 to 355 mm.
See sizes→
The same clamp-in head without the sealing cap. Fifteen sizes from 25 to 250 mm.
See sizes→
Welded onto the pipe end instead of clamping inside it. From 110 mm the head has a reinforced pulling eye. Seventeen sizes from 32 to 355 mm.
See sizes→Sizes, clamping ranges and load capacity
Choose the type, then the size by the outside diameter of the pipe. For the clamp-in heads the clamping range is the approximate inside diameter the head grips. Press Get quote on any row and we come back with a quote, stock and lead time.
With cap
Seventeen sizes, 32 to 355 mm pipe outside diameter.
| Pipe size O.D. | Part number | Clamping range, inside (approx.) | Weight | Load capacity | Quote |
|---|
Spare parts — heads with cap
For the heads with cap (part numbers ending -200). The numbers refer to the drawing. A spare-part order number is RE, the three-digit pipe size of the head and the suffix in the table — for a 110 mm head: RE 110 + the suffix. Spare parts for the heads without cap are not available at the moment.
| Description | Part number | No. in drawing | Quote |
|---|
Without cap
Fifteen sizes, 25 to 250 mm pipe outside diameter.
| Pipe size O.D. | Part number | Clamping range, inside (approx.) | Weight | Load capacity | Quote |
|---|
Welding heads
Seventeen sizes, 32 to 355 mm pipe outside diameter. The head has three stepped seats, for pipe SDR 7.4, 11 and 17, so one head fits all three wall thicknesses. Up to 90 mm the part number ends -500; from 110 mm it ends -550 and the head has a reinforced pulling eye.
| Pipe size O.D. | Part number | Pipe SDR | Pulling eye | Quote |
|---|
Load capacity is the working load limit (WLL) in straight pull according to the manufacturer's data. Data per the manufacturer's data sheet — confirm pipe size and wall thickness before ordering.
Tell us the job — we'll match the tools.
Send us your machine model and quantity and we'll come back with a quote and lead time.